Publications
« Nitrogen removal from wood laminated flooring waste by low-temperature pyrolysis. », Waste Biomass Valor., 2013.
, « Non-linear finite element modelling of the structural behaviour of screwed timber-to-concrete composite connections. », Composite Structures, vol. 102, 2013.
, « A note on the surface quality of plywood overlaid with mimosa (Acacia mearnsii) tannin and melamine urea formaldehyde impregnated paper: effects of moisture content of resin-impregnated papers before pressing on the physical properties of overlaid panels », Int. Wood Products J. , vol. 4, nᵒ 4, 2013.
, « Numerical analysis of the cutting forces in timber », ASCE Journal of Engineering Mechanics, vol. 140, nᵒ 3, 2013.
, « Numerical study of the spreading and solidification of a molten particle impacting onto a rigid substrate under plasma spraying conditions », Thermal Science, 2013.
, « Optimization of acid pretratment in order to increase the phenolic content of Picea abies bark by surface response methodology », BioResources, vol. 8, nᵒ 1, 2013.
, « Parameters scanning for linear welding of Eucalyptus benthamii wood », European Journal of Wood and Wood Products, vol. 71, 2013.
, « Particleboard production from date palm biomass », European Journal of Wood and Wood Products, vol. 71, 2013.
, « Performance of MUF resins for particleboard before and after spry-drying », J.AdhesionSci.Technol., vol. 27, nᵒ 20, 2013.
, « Phenolic resin adhesives based on chestnut hydrolysable tannins Wood Prod. J., 2013, 4(2): 95-100 », Intern.Wood Prod.J., vol. 4, nᵒ 2, 2013.
, « Physical properties of tannin/furanic resin foamed by different blowing agents », BioResources, vol. 8, nᵒ 1, 2013.
, « Physicochemical characterization of alkaline and ethanol organosolv lignins from oil palm (Elaeis guineensis) fronds as phenol substitutes for green material applications », Ind crops prod, vol. 49, 2013.
, « Pine tannin-based rigid foams: mechanical and thermal properties », Ind.Crops & Prod., vol. 43, nᵒ 245-250, 2013.
, « Poly(amidoamine)s dendrimers of different generations as components of melamine urea formaldehyde (MUF) adhesives used for particleboards production: What are the positive implications? », J.Polymer Res., vol. 20, 2013.
, « Pore size diameter, shrinkage and specific gravity evolution during the heat treatment of wood. », Innovation in woodworking industry and engineering design, vol. 1, nᵒ 1, 2013.
, « Production and properties of wood welded panels made from two canadian hardwoods », Wood Sci.Technol., vol. 47, nᵒ 5, 2013.
, « Pseudo-bond graph model for the analysis of the thermal behavior of buildings thermal science. », Journal of Thermal Science, vol. 17, nᵒ 3, 2013.
, « Pyrolysis of propane for CVI of pyrocarbon. Part IV : Main pathways involved in pyrocarbon deposit Ziegler-Devin », Journal of Analytical and Applied Pyrolysis, vol. 104, 2013.
, « Rapid optimization of Typha grass organosolv pretreatments using parallel microwave reactors for ethanol production », Ind Eng Chem Res, vol. 52, nᵒ 4, 2013.
, « Removal of Zn(II) from Aqueous Solution onto Kaolin by Batch Design », Journal of Water Resource and Protection, vol. 5, 2013.
, « Removal of Zn(II) from Aqueous Solution onto Kaolin by Batch Design », Journal of Water Resource and Protection, vol. 5, 2013.
, « Revealing the chemistry of biomass thermal conversion by means of tunable synchrotron ionisation - mass spectrometry », RCS Advances, vol. 3, 2013.
, « Selected wood properties of Prunus Africana (Hook) grown in Kenya as possible reasons for its high natural durability. », Drvna Industrija, vol. 64, nᵒ 1, 2013.
, « Selection and validation of enzymatic activities as functional markers in wood biotechnology and fungal ecology », Journal of Microbiological Methods , vol. 92, 2013.
, « Shorter chains make stronger links- Monomers enhance crosslinkling of UV-cured powders for wood coating. », European Coatings Journal, vol. 2, 2013.
,