Title: Biblio RTF Export
Author: Biblio 7.x

S.  AMIROU et PIZZI, A., «  Biosourced heat resistant coatings by cross-linking of proteins with triethyl phosphate  »,  PROGRESS IN ORGANIC COATINGS , vol. 138, 2020.

O.  AYARI, BOUALI, A., et MEAUSOONE, P. J., «  Cutting forces and accuracy characterization during wood machining with serial robots  »,  EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS , vol. 78, p. 767-775, 2020.

M. C.  NDUKWU, SIMO-TAGNE, M., ABAM, F. I., ONWUKA, O. S., PRINCE, S., et BENNAMOUN, L., «  Exergetic sustainability and economic analysis of hybrid solar-biomass dryer integrated with copper tubing as heat exchanger  », HELIYON, vol. 6, 2020.

S.  ABDALLA, PIZZI, A., et BAHABRI, F. S., «  Macro porous tannin spray-dried powder scaffolds with stem cells for bone engineering  »,  MATERIALS CHEMISTRY AND PHYSICS , vol. 239, 2020.

Z.  ABDEL-NOUR, AISSA, A., MEBAREK-OUDINA, F., RASHAD, A. M., ALI, H. M., SAHNOUN, M., et EL-GANAOUI, M., «  Magnetohydrodynamic natural convection of hybrid nanofluid in a porous enclosure: numerical analysis of the entropy generation  »,  JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY , 2020.

X. Y.  CHEN, XI, X. D., PIZZI, A., FREDON, E., DU, G. B., GERARDIN, C., et AMIROU, S., «  Oxidized demethylated lignin as a bio-based adhesive for wood bonding  »,  JOURNAL OF ADHESION , 2020.

A.  AISSA, SLIMANI, M. E. A., MEBAREK-OUDINA, F., FARES, R., ZAIM, A., KOLSI, L., SAHNOUN, M., et EL-GANAOUI, M., «  Pressure-Driven Gas Flows in Micro Channels with a Slip Boundary: A Numerical Investigation  »,  FDMP-FLUID DYNAMICS & MATERIALS PROCESSING , vol. 16, p. 147-159, 2020.

T.  PERROT, SALZET, G., AMUSANT, N., BEAUCHENE, J., GERARDIN, P., DUMARCAY, S., SORMANI, R., MOREL-ROUHIER, M., et GELHAYE, E., «  A reverse chemical ecology approach to explore wood natural durability  »,  MICROBIAL BIOTECHNOLOGY , 2020.

B.  NDIWE, PIZZI, A., TIBI, B., DANWE, R., KONAI, N., et AMIROU, S., «  African tree bark exudate extracts as biohardeners of fully biosourced thermoset tannin adhesives for wood panels  »,  INDUSTRIAL CROPS AND PRODUCTS , vol. 132, p. 253-268, 2019.

A.  KHADHRI, BOUALI, I., AOUADHI, C., LAGEL, M. C., MASSON, E., et PIZZI, A., «  Determination of phenolic compounds by MALDI-TOF and essential oil composition by GC-MS during three development stages of Origanum majorana L.  »,  BIOMEDICAL CHROMATOGRAPHY , vol. 33, 2019.

X. D.  XI, PIZZI, A., GERARDIN, C., LIAO, J. J., AMIROU, S., et ABDALLA, S., «  Glutaraldehyde-wheat gluten protein adhesives for wood bonding  »,  JOURNAL OF ADHESION , 2019.

S.  AMIROU, PIZZI, A., et DELMOTTE, L., «  Investigations of mechanical properties and chemical changes occurring during welding of thermally modified ash wood  »,  JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , vol. 34, p. 13-24, 2019.

B.  NDIWE, PIZZI, A., DANWE, R., TIBI, B., KONAI, N., et AMIROU, S., «  Particleboard bonded with bio-hardeners of tannin adhesives  »,  EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS , vol. 77, p. 1221-1223, 2019.

X. D.  XI, PIZZI, A., GERARDIN, C., LEI, H., CHEN, X. Y., et AMIROU, S., «  Preparation and Evaluation of Glucose Based Non-Isocyanate Polyurethane Self-Blowing Rigid Foams  », POLYMERS, vol. 11, 2019.

N. A.  AZIZ, LATIP, A. F. A., PENG, L. C., ABD-LATIF, N. H., BROSSE, N., HASHIM, R., et HUSSIN, M. H., «  Reinforced lignin-phenol-glyoxal (LPG) wood adhesives from coconut husk  »,  INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES , vol. 141, p. 185-196, 2019.

N.  HIMRANE, AMEZIANI, D. E., EL-GANAOUI, M., et RAGUEB, H., «  Some Insights on Unsteady Double Diffusive Natural Convection of Porous Medium in Vertical Open-Ended Cylinder  »,  ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , vol. 44, p. 1379-1392, 2019.

X. D.  XI, PIZZI, A., GERARDIN, C., CHEN, X. Y., et AMIROU, S., «  Soy protein isolate-based polyamides as wood adhesives  »,  WOOD SCIENCE AND TECHNOLOGY , vol. 54, p. 89-102, 2019.

N. H.  ABD-LATIF, RAHIM, A. A., BROSSE, N., et HUSSIN, M. H., «  The structural characterization and antioxidant properties of oil palm fronds lignin incorporated with p-hydroxyacetophenone  »,  INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES , vol. 130, p. 947-957, 2019.

F. L.  BRAGHIROLI, AMARAL-LABAT, G., BOSS, A. F. N., LACOSTE, C., et PIZZI, A., «  Tannin Gels and Their Carbon Derivatives: A Review  »,  BIOMOLECULES , vol. 9, 2019.

Y.  SHIRMOHAMMADLI, MORADPOUR, P., ABDULKHANI, A., EFHAMISISI, D., et PIZZI, A., «  Water resistance improvement by polyethyleneimine of tannin-furfuryl alcohol adhesives  »,  INTERNATIONAL WOOD PRODUCTS JOURNAL , vol. 10, p. 16-21, 2019.

S.  AMIROU, PIZZI, A., et XI, X. D., «  Wheat protein hydrolysates-resorcinol-aldehydes as potential cold setting adhesives  »,  EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS , vol. 77, p. 453-463, 2019.

I. G.  AUDU, BROSSE, N., WINTER, H., HOFFMANN, A., BREMER, M., FISCHER, S., et LABORIE, M. P., «  Acetyl Groups in Typha capensis: Fate of Acetates during Organosolv and Ionosolv Pulping  », POLYMERS, vol. 10, 2018.

A. B. B.  ATHOMO, ANRIS, S. P. E., SAFOU-TCHIAMA, R., SANTIAGO-MEDINA, F. J., CABARET, T., PIZZI, A., et CHARRIER, B., «  Chemical composition of African mahogany (K. ivorensis A. Chev) extractive and tannin structures of the bark by MALDI-TOF  »,  INDUSTRIAL CROPS AND PRODUCTS , vol. 113, p. 167-178, 2018.

T.  PERROT, SCHWARTZ, M., SAIAG, F., SALZET, G., DUMARCAY, S., FAVIER, F., GERARDIN, P., GIRARDET, J. M., SORMANI, R., MOREL-ROUHIER, M., AMUSANT, N., DIDIERJEAN, C., et GELHAYE, E., «  Fungal Glutathione Transferases as Tools to Explore the Chemical Diversity of Amazonian Wood Extractives  »,  ACS SUSTAINABLE CHEMISTRY & ENGINEERING , vol. 6, p. 13078-13085, 2018.

R.  REMOND, ALMEIDA, G., et PERRE, P., «  The gripped-box model: A simple and robust formulation of sorption hysteresis for lignocellulosic materials  »,  CONSTRUCTION AND BUILDING MATERIALS , vol. 170, p. 716-724, 2018.

G.  ALMEIDA, REMOND, R., et PERRE, P., «  Hygroscopic behaviour of lignocellulosic materials: Dataset at oscillating relative humidity variations  »,  JOURNAL OF BUILDING ENGINEERING , vol. 19, p. 320-333, 2018.

X. D.  XI, PIZZI, A., et AMIROU, S., «  Melamine-Glyoxal-Glutaraldehyde Wood Panel Adhesives without Formaldehyde  », POLYMERS, vol. 10, 2018.

R.  REMOND, BARROS, L. C. A., et ALMEIDA, G., «  Moisture transport and sorption in beech and spruce barks  »,  HOLZFORSCHUNG , vol. 72, p. 105-111, 2018.

M.  SCHWARTZ, PERROT, T., AUBERT, E., DUMARCAY, S., FAVIER, F., GERARDIN, P., MOREL-ROUHIER, M., MULLIERT, G., SAIAG, F., DIDIERJEAN, C., et GELHAYE, E., «  Molecular recognition of wood polyphenols by phase II detoxification enzymes of the white rot Trametes versicolor  »,  SCIENTIFIC REPORTS , vol. 8, 2018.

O.  ALLEGRETTI, REMOND, R., et PERRE, P., «  Nonsymmetrical drying tests - Experimental and numerical results for free and constrained spruce samples  »,  DRYING TECHNOLOGY , vol. 36, p. 1554-1562, 2018.

M. H.  HUSSIN, SAMAD, N. A., ABD-LATIF, N. H., ROZULI, N. A., YUSOFF, S. B., GAMBIER, F., et BROSSE, N., «  Production of oil palm (Elaeis guineensis) fronds lignin-derived non-toxic aldehyde for eco-friendly wood adhesive  »,  INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES , vol. 113, p. 1266-1272, 2018.

C.  DEL-MENEZZI, AMIROU, S., PIZZI, A., XI, X. D., et DELMOTTE, L., «  Reactions with Wood Carbohydrates and Lignin of Citric Acid as a Bond Promoter of Wood Veneer Panels  »,  POLYMERS , vol. 10, 2018.

S.  CHOUAYA, ABBASSI, M. A., YOUNES, R. B., et ZOULALIAN, A., «  Scrap Tires Pyrolysis: Product Yields, Properties and Chemical Compositions of Pyrolytic Oil  »,  RUSSIAN JOURNAL OF APPLIED CHEMISTRY , vol. 91, p. 1603-1611, 2018.

S.  DENG, PIZZI, A., DU, G., LAGEL, M. C., DELMOTTE, L., et ABDALLA, S., «  Synthesis, structure characterization and application of melamine-glyoxal adhesive resins  »,  EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS , vol. 76, p. 283-296, 2018.

M. C.  BASSO, PIZZI, A., DELMOTTE, L., et ABDALLA, S., «  Analysis of the Cross-Linking Reaction of Lignin with Triethyl Phosphate by MALDI-TOF and C-13 NMR  », POLYMERS, vol. 9, 2017.

S.  AMIROU, PIZZI, A., et DELMOTTE, L., «  Citric acid as waterproofing additive in butt joints linear wood welding  »,  EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS , vol. 75, p. 651-654, 2017.

J.  SANTOS, ANTORRENA, G., FREIRE, M. S., PIZZI, A., et GONZALEZ-ALVAREZ, J., «  Environmentally friendly wood adhesives based on chestnut (Castanea sativa) shell tannins  »,  EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS , vol. 75, p. 89-100, 2017.

C.  DELGADO-SANCHEZ, AMARAL-LABAT, G., GRISHECHKO, L. I., SANCHEZ-SANCHEZ, A., FIERRO, V., PIZZI, A., et CELZARD, A., «  Fire-resistant tannin-ethylene glycol gels working as rubber springs with tuneable elastic properties  »,  JOURNAL OF MATERIALS CHEMISTRY A , vol. 5, p. 14720-14732, 2017.

M.  THEBAULT, PIZZI, A., SANTIAGO-MEDINA, F. J., AL-MARZOUKI, F. M., et ABDALLA, S., «  Isocyanate-Free Polyurethanes by Coreaction of Condensed Tannins with Aminated Tannins  »,  JOURNAL OF RENEWABLE MATERIALS , vol. 5, p. 21-29, 2017.

R.  BAHAR, AZZOUZ, S., REMOND, R., OUERTANI, S., ELAIEB, M. T., et EL-CAFCI, M. A., «  Moisture sorption isotherms and thermodynamic properties of Oak wood (Quercus robur and Quercus canariensis): optimization of the processing parameters  »,  HEAT AND MASS TRANSFER , vol. 53, p. 1541-1552, 2017.

B.  SHRESTHA, LE-BRECH, Y., GHISLAIN, T., LECLERC, S., CARRE, V., AUBRIET, F., HOPPE, S., MARCHAL, P., PONTVIANNE, S., BROSSE, N., et DUFOUR, A., «  A Multitechnique Characterization of Lignin Softening and Pyrolysis  »,  ACS SUSTAINABLE CHEMISTRY & ENGINEERING , vol. 5, p. 6940-6949, 2017.

X.  ZHOU, SEGOVIA, C., ABDULLAH, U. H., PIZZI, A., et DU, G., «  A novel fiber-veneer-laminated composite based on tannin resin  »,  JOURNAL OF ADHESION , vol. 93, p. 461-467, 2017.

F.  MNASRI, ABAHRI, K., EL-GANAOUI, M., BENNACER, R., et GABSI, S., «  NUMERICAL ANALYSIS OF HEAT, AIR, AND MOISTURE TRANSFERS IN A WOODEN BUILDING MATERIAL  »,  THERMAL SCIENCE , vol. 21, p. 785-795, 2017.

A.  AISSA, EL-GANAOUI, M., et SAHNOUN, M., «  Numerical investigation of heat and momentum transfer to particles in high temperature thermal spraying  »,  EUROPEAN PHYSICAL JOURNAL-APPLIED PHYSICS , vol. 78, 2017.

B.  BELLEVILLE, AMIROU, S., PIZZI, A., et OZARSKA, B., «  Optimization of Wood Welding Parameters for Australian Hardwood Species  »,  BIORESOURCES , vol. 12, p. 1007-1014, 2017.

F. J.  SANTIAGO-MEDINA, PIZZI, A., BASSO, M. C., DELMOTTE, L., et ABDALLA, S., «  Polycondensation Resins by Lignin Reaction with (Poly) amines  »,  JOURNAL OF RENEWABLE MATERIALS , vol. 5, p. 388-399, 2017.

Q.  KLEINDIENST, BESSERER, A., ANTOINE, M. L., PERRIN, C., BOCQUET, J. F., et BLÉRON, L., «  Predicting the beech wood decay and strength loss in-ground  »,  INTERNATIONAL BIODETERIORATION & BIODEGRADATION , vol. 123, p. 96-105, 2017.

S.  ABDALLA, PIZZI, A., AL-GHAMDI, M. A., et ALWAFI, R., «  Preparation and characterization of bio resin natural tannin/poly (vinylidene fluoride): A high dielectric performance nano-composite for electrical storage  »,  CHEMICAL PHYSICS , vol. 494, p. 61-71, 2017.

M.  ASAD, MENANA, Z., ZIEGLER-DEVIN, I., BERT, V., CHALOT, M., HERZIG, R., MENCH, M., et BROSSE, N., «  Pretreatment of trace element-enriched biomasses grown on phytomanaged soils for bioethanol production  »,  INDUSTRIAL CROPS AND PRODUCTS , vol. 107, p. 63-72, 2017.

S.  ABDALLA, AL-WAFI, R., et PIZZI, A., «  Stability and combustion of metal nano-particles and their additive impact with diesel and biodiesel on engine efficiency: A comprehensive study  »,  JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY , vol. 9, 2017.

S.  AMIROU, PIZZI, A., BELLEVILLE, B., et DELMOTTE, L., «  Water resistance of natural joint of spruce produced by linear friction welding without any treatment  »,  INTERNATIONAL WOOD PRODUCTS JOURNAL , vol. 8, p. 201-207, 2017.

A.  AGUILERA, MEAUSOONE, P. J., ROLLERI, A., BARROS, J. L., BURGOS, F., et AGUILAR, C., «  Advances on indirect methods to evaluate tool wear for Radiata pine solid wood molding  », WEAR, vol. 350-351, p. 27-34, 2016.

S.  JAHANSHAHI, PIZZI, A., ABDULKHANI, A., et SHAKERI, A., «  Analysis and Testing of Bisphenol A-Free Bio-Based Tannin Epoxy-Acrylic Adhesives  »,  POLYMERS , vol. 8, 2016.

M. C.  LAGEL, HAI, L., PIZZI, A., BASSO, M. C., DELMOTTE, L., ABDALLA, S., ZAHED, A., et AL-MARZOUKI, F. M., «  Automotive brake pads made with a bioresin matrix  »,  INDUSTRIAL CROPS AND PRODUCTS , vol. 85, p. 372-381, 2016.

S.  GONZALEZ-GARCIA, LACOSTE, C., AICHER, T., FEIJOO, G., LIJO, L., et MOREIRA, M. T., «  Environmental sustainability of bark valorisation into biofoam and syngas  »,  JOURNAL OF CLEANER PRODUCTION , vol. 125, p. 33-43, 2016.

M. C.  BASSO, PIZZI, A., AL-MARZOUKI, F., et ABDALLA, S., «  Horticultural/hydroponics and floral natural foams from tannins  »,  INDUSTRIAL CROPS AND PRODUCTS , vol. 87, p. 177-181, 2016.

S.  JAHANSHAHI, PIZZI, A., ABDULKHANI, A., DOOSTHOSEINI, K., SHAKERI, A., LAGEL, M. C., et DELMOTTE, L., «  MALDI-TOF, C-13 NMR and FT-MIR analysis and strength characterization of glycidyl ether tannin epoxy resins  »,  INDUSTRIAL CROPS AND PRODUCTS , vol. 83, p. 177-185, 2016.

H.  DU, LV, P., AYOUZ, M., BESSERER, A., et PERRE, P., «  Morphological Characterization and Quantification of the Mycelial Growth of the Brown-Rot Fungus Postia placenta for Modeling Purposes  »,  PLOS ONE , vol. 11, 2016.

S.  BAHRIA, AMIRAT, M., HAMIDAT, A., EL-GANAOUI, M., et SLIMANI, M. E., «  Parametric study of solar heating and cooling systems in different climates of Algeria - A comparison between conventional and high-energy-performance buildings  », ENERGY, vol. 113, p. 521-535, 2016.

A.  SAAD, ECHCHELH, A., HATTABI, M., EL-GANAOUI, M., et AHD, M., «  PERMEABILITY IDENTIFICATION FOR A FIBER-REINFORCED COMPOSITE BY INVERSE ANALYSIS  »,  COMPOSITES-MECHANICS COMPUTATIONS APPLICATIONS , vol. 7, p. 81-93, 2016.

S.  MOUNGUENGUI, TCHINDA, J. B. S., NDIKONTAR, M. K., DUMARCAY, S., ATTEKE, C., PERRIN, D., GELHAYE, E., et GERARDIN, P., «  Total phenolic and lignin contents, phytochemical screening, antioxidant and fungal inhibition properties of the heartwood extractives of ten Congo Basin tree species  »,  ANNALS OF FOREST SCIENCE , vol. 73, p. 287-296, 2016.

S.  ABDALLA, PIZZI, A., BAHABRI, F., et GANASH, A., «  Analysis of Valonia Oak (Quercus aegylops) Acorn Tannin and Wood Adhesives Application  »,  BIORESOURCES , vol. 10, p. 7165-7177, 2015.

N.  KONAI, PIZZI, A., RAIDANDI, D., LAGEL, M. C., L?HOSTIS, C., SAIDOU, C., HAMIDO, A., ABDALLA, S., BAHABRI, F., et GANASH, A., « Aningre tannin extract characterisation and performance as an adhesive resin », Ind. Crop. Prod, vol.  77, p. 225?231 , 2015.

S.  BEN-MAHMOUD, SAAD, H., CHARRIER, B., PIZZI, A., RODE, K., AYED, N., et CHARRIER-EL-BOUHTOURY, F., «  Characterization of sumac (Rhus tripartitum) root barks tannin for a potential use in wood adhesives formulation  »,  WOOD SCIENCE AND TECHNOLOGY , vol. 49, p. 205-221, 2015.

M. C.  LAGEL, PIZZI, A., BASSO, M. C., et ABDALLA, S., «  Development and characterization of abrasive grinding wheels with a tannin-furanic resins matrix  »,  INDUSTRIAL CROPS AND PRODUCTS , vol. 65, p. 343-348, 2015.

M.  KHELIFA, AUCHET, S., MEAUSOONE, P. J., et CELZARD, A., «  Finite element analysis of flexural strengthening of timber beams with Carbon Fibre-Reinforced Polymers  »,  ENGINEERING STRUCTURES , vol. 101, p. 364-375, 2015.

M. C.  BASSO, LAGEL, M. C., PIZZI, A., CELZARD, A., et ABDALLA, S., «  First Tools for Tannin-Furanic Foams Design  »,  BIORESOURCES , vol. 10, p. 5233-5241, 2015.

S.  DROVOU, PIZZI, A., LACOSTE, C., ZHANG, J. Z., ABDULLA, S., et EL-MARZOUKI, F. M., «  Flavonoid tannins linked to long carbohydrate chains - MALDI-TOF analysis of the tannin extract of the African locust bean shells  »,  INDUSTRIAL CROPS AND PRODUCTS , vol. 67, p. 25-32, 2015.

S.  ABDALLA, PIZZI, A., BAHABRY, F., et GANASH, A., « Furanic copolymers with synthetic and natural phenolic materials for wood adhesives - a MALDI TOF study », Maderas-Cienc Tecnol, p. 99 - 104, 2015.

J. Z.  ZHANG, AMIROU, S., ESSAWY, H. A., PIZZI, A., GAO, Q., et LI, J. Z., «  Hyperbranched Poly(amidoamine)s as Additives for Urea Formaldehyde Resin and Their Application in Particleboard Fabrication  »,  BIORESOURCES , vol. 10, p. 782-792, 2015.

Y.  BENG-HOONG, PIZZI, A., ABDCHUAH, L., et HARUN, J., « Phenol-urea-formaldehyde resin co-polymer synthesis and its influence on elaeis palm trunk plywood mechanical performance evaluated by 13C-NMR and maldi-tof mass spectrometry, », , Int. J. Adhesion Adhesives, vol. 63, p. 117-123, 2015.

M. C.  LAGEL, PIZZI, A., REDL, A., et AL-MARZOUKI, F. M., « Phenol-wheat protein-formaldehyde adhesives for wood-based panels », Eur. J. Wood Prod, vol. 73(4), p. 439-448, 2015.

A.  AISSA, ABDELOUAHAB, M., NOUREDDINE, A., EL-GANAOUI, M., et PATEYRON, B., «  RANZ AND MARSHALL CORRELATIONS LIMITS ON HEAT FLOW BETWEEN A SPHERE AND ITS SURROUNDING GAS AT HIGH TEMPERATURE  »,  THERMAL SCIENCE , vol. 19, p. 1521-1528, 2015.

B.  CLUET, MAUVIEL, G., ROGAUME, Y., AUTHIER, O., et DELEBARRE, A., «  Segregation of wood particles in a bubbling fluidized bed  »,  FUEL PROCESSING TECHNOLOGY , vol. 133, p. 80-88, 2015.

H. D.  BOURAS, BENTURKI, O., BOURAS, N., ATTOU, M., DONNOT, A., MERLIN, A., ADDOUN, F., et HOLTZ, M. D., « The use of an agricultural waste material from Ziziphus jujuba as a novel adsorbent for humic acid removal from aqueous solutions », JOURNAL OF MOLECULAR LIQUIDS, vol. 211, p. 1039-1046, 2015.

S.  AMIROU, ZHANG, J., ESSAWY, H., PIZZI, A., ZERIZER, A., et DELMOTTE, L., « Utilisation of hydrophilic/ hydrophobic poly(amidoamine)s as additives for melamine-urea-formaldehyde (MUF) adhesives and consequent application in particleboard fabrication, », Polymers Adv. Technol. , p.  2255-2264 , 2015.

H.  SAAD, PIZZI, A., CHARRIER, B., AYED, N., RODE, K., CHARRIER-EL-BOUHTOURY, F., et BOUHTHOURY, F., « Valorisation of Tunisian pomegranate peels tannins in green adhesives formulations »,  J. Renew. Mat, vol. 3(1), p. 34-43, 2015.

A.  SZCZUREK, AMARAL-LABAT, G., FIERRO, V., PIZZI, A., et CELZARD, A., « Chemical activation of tannin-based hydrogels by soaking in KOH and NaOH solutions.  », Microporous & Mesoporous Materials, vol. 196, 2014.

G.  NONVIHO, PARIS, C., MUNIGLIA, L., SESSOU, P., AGBANGNAN, P., BROSSE, N., et SOHOUNLOUE, D., « Composition of Lophira lanceolata and Carapa procera seed oils.  », Research Journal of Chemical Sciences, vol. 4, n? 10, 2014.

M. C.  LAGEL, PIZZI, A., BASSO, M. C., et ABDALLA, S., « Development and characterisation of abrasive grinding wheels with a tannin-furanic resin matrix.  », Ind. Crops & Prod., 2014.

S.  MOUNGUENGUI, ATTEKE, C., SAHA-TCHINDA, J. - B., NDIKONTAR, M. - K., DUMARCAY, S., et GERARDIN, P., « Discoloration and biodegradation of two dyes by white-rot fungi Perreniporia tephropora MUCL 47500 isolated in Gabon », Int.J.Curr.Microbiol.App.Sci, vol. 3, n? 6, 2014.

R.  ABDALLAH, AUCHET, S., et MEAUSOONE, P. J., « A dynamic measurement of a disc chipper cutting forces », Biomass & Bioenergy Journal, vol. 64, n? 5, 2014.

A.  AKHIATE, SEMMA, A., EL-GANAOUI, M., et ANOUAR, A., « Effect of double thermal modulation on heat transfer in a square cavity heated from bellow », Engineering Solid Mechanics, vol. 2, n? 2, 2014.

J.  ZHANG, AMIROU, S., PIZZI, A., GAO, Q., ESSAWY, H., et LI, J., « Effect of some hyperbranched poly(amidoamine)s as additives for urea formaldehyde (UF) resin before their application in particleboards fabrication.  », BioRessources, vol. 10, n? 1, 2014.

H. M.  ALI, MAKSIMENKO, A., URBINATI, G., CHAPUIS, H., RAOUANE, M., DESMAELE, D., YASUHIRO, H., HARASHIMA, H., COUVREUR, P., et MASSAAD-MASSAADE, L., « Effects of silencing RET-PTC1 oncogene in papillary thyroid carcinoma by siRNA-squalene nanoparticles with and without fusogenic companion GALA-Cholesterol », Thyroid, vol. 24, n? 2, 2014.

H. - M.  ALI, URBINATI, G., CHAPUIS, H., DESMAELE, D., RAOUANE, M., YASUHIRO, H., HARASHIMA, H., COUVREUR, P., et MASSAAD-MASSADE, L., « Effects of silencing the RET/PTC1 oncogene in papillary thyroid carcinoma by siRNA-squalene nanoparticles with and without fusogenic companion GALA-Cholesterol. »,  Thyroid, vol. 24, n? 2, 2014.

H. M.  ALI, URBINATI, G., CHAPUIS, H., DESMAELE, D., BERTRAND, J. R., COUVREUR, P., et MASSAAD-MASSAADE, L., « Effects of siRNA on RET/PTC3 junction oncogene in papillary thyroid carcinoma : from molecular and cellular studies to preclinical investigations. », PLoS ONE, vol. 9, n? 4, 2014.

H. - M.  ALI, URBINATI, G., CHAPUIS, H., DESMAELE, D., BERTRAND, J. - R., COUVREUR, P., et MASSAAD-MASSADE, L., « Effects of siRNA on RET/PTC3 junction oncogene in papillary thyroid carcinoma: from molecular and cellular studies to preclinical investigations. », PLoS ONE, vol. 9, n? 4, 2014.

U. H.  ABDULLAH, PIZZI, A., et ZHOU, X., « High pressure paper laminates from mimosa tannin resin.  », Int. Wood Products J., vol. 5, n? 4, 2014.

S.  AMIROU, ZERIZER, A., et PIZZI, A., « Investigation of chemical, physical, and mechanical properties of Algerian date palm wood.  », Materials Testing, vol. 56, n? 3, 2014.

S.  ABDALLA, PIZZI, A., AYED, N., CHARRIER-EL-BOUTHOURY, F., CHARRIER, B., BAHABRY, F., et GANASH, A., « MALDI-TOF analysis of Aleppo pine (Pinus haleppensis) bark tannin.  », BioRessources, vol. 9, n? 2, 2014.

S.  ABDALLA, PIZZI, A., AYED, N., CHARRIER, F., BAHARRY, F., et GANASH, A., « MALDI-TOF and 13C NMR analysis of Tunisian Zyzyphus jubjuba root bark tannins.  », Ind. Crops & Prod., vol. 59, 2014.

A.  SAUGET, PIZZI, A., GUILLOT, A., GODART, S., APOLIT, R., et MEZZINA, M., « Performance of honeymoon MUF adhesives for glulam. », Eur. J. Wood & Wood products, vol. 72, n? 5, 2014.

N.  BILOT, SAINT-ANDRE, L., ROGAUME, Y., BRECHET, C., AUGUSTO, L., DUPOND, C., BODINEAU, G., et DELEUZE, C., « Predicting higher heating values of wood from forest biomass nutrient content.  », Forest Ecology and Management , 2014.

B.  CLUET, MAUVIEL, G., ROGAUME, Y., AUTHIER, O., et DELABARRE, A., « Segregation of wood particles in a bubbling fuidized bed. », Fuel Processing Technology, vol. 133, 2014.

M. C.  BASSO, PIZZI, A., LACOSTE, C., DELMOTTE, L., AL-MARZOUKI, F. A., ABDALLA, S., et CELZARD, A., « Tannin-furanic-polyurethane foams for industrial continuous plant lines », Polymers, vol. 6, 2014.

S.  AMIROU, ZHANG, J., PIZZI, A., ESSAWY, H., ZERIZER, A., LI, J., et DELMOTTE, L., « Utilization of hydrophilic/hydrophobic Hyperbranched Poly(amidoamines)s additives fort melamine urea formaldehyde (MUF) adhesives. », Polymer Composites, 2014.

V.  MAURIN, CROUTXE-BARGHORN, C., ALLONAS, X., BRENDLE, J., BESSIERE, J., MERLIN, A., et MASSON, E., « UV powder coatings containing synthetic Ag-beidellite for antibacterial properties », Appled Clay Sciences, vol. 96, 2014.

G.  AMARAL-LABAT, GOURDON, E., FIERRO, V., PIZZI, A., et CELZARD, A., « Acoustic properties of cellular vitreous carbon foams », Carbon, vol. 58, 2013.

J. B. T.  SAHA, ABIA, D., DUMARCAY, S., NDIKONTAR, M. - K., GERARDIN, P., NGAMVENG, N. J., et PERRIN, D., «  Antioxidant activities, total phenolic contents and chemical compositions of extracts from four Cameroonian woods: padouk (Pterocarpus soyauxii Taubb), tali (Erythrophleum suaveolens), moabi (Baillonella toxisperma), and movingui  », Industrial Crops and Products, vol. 41, 2013.

C.  ATTEKE, MOUNGUENGUI, J., SAHA-TCHINDA, J. - B., NDIKONTAR, M. - K., IBRAHIM, B., GELHAYE, E., et GERARDIN, P., « Biodegradation of Reactive Blue 4 and Orange G by Pycnoporus sanguineus Strain Isolated in Gabon », Bioremed Biodeg, vol. 4, 2013.

J.  FRANCOIS, ABDELOUAHED, L., MAUVIEL, G., PATISSON, F., MIRGAUX, O., ROGAUME, C., ROGAUME, Y., FEIDT, M., et DUFOUR, A., « Detailed process modeling of a wood gasification combined heat and power plant »,  Biomass & Bioenergy, vol. 51, 2013.

S.  MOUNGUENGUI, ATTEKE, C., SAHA-TCHINDA, J. - B., KOR-NDIKONTAR, M., DUMARCAY, S., et GERARDIN, P., « Discoloration of dyes by hexagonia apiara fungus isolated in Gabon ans screening of enzymes on solid culture medium. », International Journal of Current Research, vol. 5, n? 3886-3891, 2013.

S.  AMIROU, ZERIZER, A., HADDADOU, I., et MERLIN, A., « Effects of corona discharge treatment on the mechanical properties of biocomposites from polylactic acid and Algerian date palm fibres », Sci. Res. Essays, vol. 8, n? 21, 2013.

A.  MOUBARIK, MANSOURI, H. R., PIZZI, A., ALLAL, A., CHARPIER, F., BADIA, M. A., et CHARRIER, B., « Evaluation of mechanical and physical properties of industrial particleboard bonded with a corn flour-urea-formaldehyde adhesive », Composites: part B, vol. 44, 2013.

R.  REMOND, DE LA CRUZ-LEFEYRE, M., ALEON, D., et PERRE, P., « Investigation of oscillating climates for wood drying using the flying wood test and loaded beams : need for a new mechanosorptive model.  », Maderas Ciencia y tecnologia, vol. 15, n? 3, 2013.

G.  AUDU, BROSSE, N., DESHARNAIS, L., et SUDIT-RAKSHIT, K., « Investigation of the Effects of 1-Butyl-3-Methylimidazolium Acetate Pretreatment and Enzymatic Hydrolysis of  Typha capensis », Idi. Energy and Fuel , vol. 27, n? 1, 2013.

G.  VAZQUEZ, PIZZI, A., FREIRE, M. S., SANTOS, J., ANTORRENA, G., et GONZALEZ-ALVAREZ, J., « MALDI-TOF, HPLC-ESI-TOF, AND 13C NMR characterisation of chestnut (Castanea sativa) shell tannins », Wood Science and Technology, vol. 47, n? 3, 2013.

A.  MOUBARIK, PIZZI, A., CHARRIER, F., ALLAL, A., BADIA, M. - A., MANSOURI, H. R., et CHARRIER, B., « Mechanical characterization of industrial particleboard panels glued with cornstarch- mimosa tannin- urea formaldehyde resins », J.Adh.Sci.Technol, vol. 27, 2013.

G.  AMARAL-LABAT, SAHIMI, M., PIZZI, A., FIERRO, V., et CELZARD, A., « Mechanical properties of heat-treated organic foams », Physical Reviews, vol. 87, n? 3, 2013.

E. M.  MEGHLAT, OUDJENE, M., AIT-AIDER, H., et BATOZ, J. L., « A new approach to model nailed and screwed timber joints using the finite element method. », Construction and Building Materials, vol. 41, 2013.

A.  SZCZUREK, AMARAL, G., FIERRO, V., PIZZI, A., et CELZARD, A., « New families of carbon gels based on natural resources », J. Physics: conferences Series, vol. 416, n? 1, 2013.

M.  OUDJENE, MEGHLAT, E. M., AIT-AIDER, H., et BATOZ, J. L., « Non-linear finite element modelling of the structural behaviour of screwed timber-to-concrete composite connections. », Composite Structures, vol. 102, 2013.

U. H.  ABDULLAH, ZHOU, X., PIZZI, A., et MERLIN, A., « A note on the surface quality of plywood overlaid with mimosa (Acacia mearnsii) tannin and melamine urea formaldehyde impregnated paper: effects of moisture content of resin-impregnated papers before pressing on the physical properties of overlaid panels  », Int. Wood Products J. , vol. 4, n? 4, 2013.

S.  ANDRADE-MARTINS, GANIER, T., PIZZI, A., et DEL MENEZZI, C., « Parameters scanning for linear welding of Eucalyptus benthamii wood », European Journal of Wood and Wood Products, vol. 71, 2013.

S.  AMIROU, ZERIZER, A., PIZZI, A., HADDADOU, I., et ZHOU, X., « Particleboard production from date palm biomass », European Journal of Wood and Wood Products, vol. 71, 2013.

M. - H.  HUSSIN, AFIDAH-ABDUL, R., MOHAMAD-NASIR, M. - I., et BROSSE, N., « Physicochemical characterization of alkaline and ethanol organosolv lignins from oil palm (Elaeis guineensis) fronds as phenol substitutes for green material applications », Ind crops prod, vol. 49, 2013.

V.  MAURIN, ALLONAS, X., CROUTXE-BARGHORN, C., BESSIERES, J., et BESSIERES, J., « Shorter chains make stronger links- Monomers enhance crosslinkling of UV-cured powders for wood coating. », European Coatings Journal, vol. 2, 2013.

G.  AMARAL-LABAT, ZOLLFRANK, C., ORTONA, A., PUSTERLA, S., PIZZI, A., FIERRO, V., et CELZARD, A., « Structure and oxidation resistance of microcellular Si-SiC foams derived from natural resins », Ceramics International, vol. 39, 2013.

U. H.  ABDULLAH, ZHOU, X., PIZZI, A., et MERLIN, A., « Surface quality of plywood overlaid with mimosa (Acacia mearnsii) tannin and melamine urea formaldehyde impregnated paper:  Effects of moisture content of resin-impregnated papers before pressing on the physical properties of overlaid panels », Int. wood Products J. , vol. 4, n? 4, 2013.

G.  AMARAL-LABAT, SZCZCUREK, A., FIERRO, V., PIZZI, A., et CELZARD, A., « Systematic studies of tannin-formaldehyde aerogels: preparation and properties », Sci.Techn.Adv.Materials, vol. 14, n? 1, 2013.

G.  AMARAL-LABAT, GRISHECHKO, L. I., FIERRO, V., KUTZNETSOV, B. N., PIZZI, A., et CELZARD, A., « Tannin based xerogels with distinctive porous structure », Biomass and Bioenergy, vol. 56, 2013.

J.  ZHU, ABHYANKAR, H., NJUGUNA, J., PERREUX, D., THIEBAUD, F., CHAPELLE, D., PIZZI, A., SAUGET, A., et NICOLLIN, A., « Tannin-based flax fibre-reinforced bio-composites for structural application in Superlight Electric Vehicles »,  Ind Crops & Prod, vol. 50, 2013.

U. H. B.  ABDULLAH et PIZZI, A., « Tannin-Furfuryl alcohol wood panel adhesives without formaldehyde », European Journal of Wood and Wood Products, vol. 71, n? 1, 2013.

M.  El-GANAOUI, ADDAKIRI, S., et SEMMA, E., « On the aptitude of the lattice Blotzmann approach for the treatment of the transient heat transfer with crack resistance », Comptes Rendus Mécanique, vol. 340, n? 7, 2012.

G.  AMARAL-LABAT, SZCZUREK, A., FIERRO, V., PIZZI, A., MASSON, E., et CELZARD, A., « "Blue-glue": A new precursor of carbon aerogels »,  Microporous and Mesoporous Materials, vol. 158, 2012.

H.  SAAD, CHARRIER-EL-BOUHTOURY, F., PIZZI, A., RODE, K., CHARRIER, B., et AYED, N., « Characterization of pomegranate peel tannin extractives », Ind.Crops & Products, vol. 40, 2012.

P.  KUZIR, PADUBSKAYA, G., SHUBA, M., MAKSIMENKO, S., CELZARD, A., FIERRO, V., AMARAL-LABAT, G., PIZZI, A., MACUTKEVIC, J., BANYS, J., BISTARELLI, S., MASTRUCCI, M., MICCIULLA, F., SACCO, I., et BELLUCCI, S., « Electromagnetic shielding efficiency in Ka-band: carbon foam versus epoxy/CNT composites », J. Nanophotonics, vol. 6, 2012.

P.  PERRE, REMOND, R., MOUGEL, E., et ALMEIDA, G., « Energy consumption in the convective drying of solid wood analyzed by a multiscale computational model »,  Drying Technology Journal, vol. 30, n? 11-12, 2012.

I. G.  AUDU, BROSSE, N., DESHARNAIS, L., et RAKSHIT, S. K., « Ethanol organosolv pretreatment of Typha Capensis for bio-ethanol production and co-products  », BioRessources, vol. 7, n? 4, 2012.

C.  O'LOISINGH, OUDJENE, M., AIT-ADLER, H., FANNING, P., PIZZI, A., SHOTTON, E., et MEGHLAT, E. - M., « Experimental study of timber-to-timber composite beam using welded-through wood dowels », Construct.Build.Mat., vol. 36, 2012.

G.  AMARAL-LABAT, GRISHECHKO, L., SZCZUREK, A., FIERRO, V., PIZZI, A., KUZNETSOV, B., et CELZARD, A., « Highly mesoporous organic aerogels derived from soy and tannin », Green Chemistry, vol. 14, 2012.

G.  AMARAL-LABAT, SZCZUREK, A., FIERRO, V., PIZZI, A., MASSON, E., et CELZARD, A., « Impact of depressurizing rate on the porosity of aerogels », Microporous & Mesoporous Materials, vol. 152, 2012.

L.  GRISHECHKO, AMARAL-LABAT, G., SZCZUREK, A., FIERRO, V., PIZZI, A., KUZNETSOV, V., et CELZARD, A., « New tannin-lignin aerogels », Ind.Crops & Prod., vol. 41, 2012.

L.  GRISHECHKO, AMARAL-LABAT, G., SZCZUREK, A., FIERRO, V., PIZZI, A., KUZNETSOV, V., et CELZARD, A., « New tannin-lignin aerogels », Ind.Crops & Prod., vol. 41, 2012.

E. M.  MEGHLAT, OUDJENE, M., AIT-AIDER, H., et BATOZ, J. L., « A one-dimentional 4-node shear-flexible beam element for beam-to-solid modeling in mechanically jointed connections made with screws or nails », e-Book Full Papers, 2012.

G.  AMARAL-LABAT, SZCZUREK, A., FIERRO, V., STEIN, N., BOULANGER, C., PIZZI, A., et CELZARD, A., « Pore structure and electrochemical performances of tannin-based carbon cryogels », Biomass and Bioenergy, vol. 39, 2012.

V.  MAURIN, ALLONAS, X., CROUTXE-BARGHORN, C., BESSIERE, J., et MERLIN, A., « UV Powders for wood coatings », Radtech Report, vol. 2, 2012.

V.  MAURIN, BESSIERE, J., CROUTXE-BARGHORN, C., ALLONAS, X., MERLIN, A., et MASSON, E., « Wood coating by UV powders », Cellulose Chem. Technol., vol. 46, n? 7-8, 2012.

F.  AYAD, BENELMIR, R., et SOUAYED, A., « CO2 evaporators design for vehicle HVAC operation: modelization and experimentation », Applied Thermal Engineering, 2011.

P. I. Z. Z. I.  A, R, M. A. N. S. O. U. R. I. H., M, L. E. B. A. N. J.  ., L., D. E. L. M. O. T. T. E., P, O. M. R. A. N. I., et F, P. I. C. H. E. L. I. N., « Enhancing the exterior performance of wood linear and rotational welding. », J. Adh. Sci. Technol., vol. , 25, 2011.

R.  ABDALLAH, AUCHET, S., et MEAUSOONE, P. - J., « Experimental study about the effects of disc chipper settings on the distribution of wood chip size »,  Biomass and Bioenergy Journal, vol. 35, n? 2, 2011.

G.  CLEON, AMODEO, T., FACCINETTO, P., et DESGROUX, P., « Laser induced incandescence determination of the ratio of the soot absorption functions at 532 nm and 1064 nm in the nucleation zone of a low pressure premixed sooting flame », Applied Physics B: Lasers and Optics, vol. 104, p. 297-305, 2011.

R.  REMOND et ALMEIDA, G., « Mass diffusivity of Low Density Fiberboard Determined Under Steady and Unsteady State Conditions: Evidence of dual scale mechanisms in the diffusion. », Wood Material Science and Engineering, vol.  6(1&2): 23 , 2011.

S.  ELBARIJI, PETRISSANS, A., ELAMINE, M., OUZAOUIT, K., KABLI, H., ALBOURINE, A., et GERARDIN, P., « Removal of Cu2+ from aqueous solutions by adsorption on chemically modified cellulosic supports. », Particulate Science and Technology, vol. 29, n? 4, 2011.

S.  ELBARIJI, PETRISSANS, A., ELAMINE, M., OUZAOUIT, K., KABLI, H., ALBOURINE, A., et GERARDIN, P., « Removal of Cu2+ from aqueous solutions by adsorption on chemically modified cellulosic supports », Science and Technology, vol. 29, n? 4, 2011.

S.  AUCHET, SEGOVIA, C., MANSOURI, H. R., MEAUSOONE, P. J., PZZI, A., et OMRANI, P., « Accelerating vs. Constant rate of insertion in wood dowel welding », J. Adhesion Sci. Technol., vol. 24, 2010.

A.  MOUBARIK, PIZZI, A., ALLAL, A., CHARRIER, F., KHOUK, A., et CHARRIER, B., « Cornstarch-mimosa tannin urea-formaldehyde resins as adhesives in the particleboard production.  », Starch/Stärke, vol. 62, 2010.

A.  MOUBARIK, CHARRIER, B., ALLAL, A., CHARRIER, F., et PIZZI, A., « Development and optimisation of a new formaldehyde-free cornstarch and tannin adhesives.  », Holz Roh Werkstoff, vol. 68, n? 2, 2010.

E.  PENDLEBURY, LEI, H., ANTOINE, M. L., et PIZZI, A., « Melamine-formaldehyde resins without urea for wood panels », J. Adhesion Sci. Technol., vol. 24, n? 8, 2010.

E.  MOUGEL, SEGOVIA, C., PIZZI, A., et A., T. H. O. M. A. S., « Shrink-Fitting and Dowel Welding in Mortise and Tenon Structural Wood Joints », Journal of Adhesion Science and Technology, vol. 25, 2010.

A.  SZCZUREK, JUREWICZ, K., AMARAL-LABAT, G., FIERRO, V., PIZZI, A., et CELZARD, A., « Structure and electrochemical capacitance of carbon cryogels derived from phenol-formaldehyde resins.  », Carbon, vol. 48, n? 13, 2010.

O. V.  HORDIYENKO, RUDENKO, I. V., BIITSEVA, A. V., TUROV, A. V., ARRAULT, A., BROSSE, N., FABRE, O., JAMART-GREGOIRE, B., ZUBATYUK, R. I., et SHISHKIN, O. V., « 1,1,3-Trichloro-1H-isoindole as a versatile reagent in the N',N''-1H-isoindole-1,3-diylidenedicarbohydrazide synthesis », Tetrahedron, vol. 65, 2009.

N.  AMUSANT, ARNOULD, O., PIZZI, A., DESPRES, A., BARDET, S., MANSOURI, H. R., et BAUDASSE, C., « Biological properties of an OSB eco-product manufactured from a mixture of durable and non-durable species and natural resins », Holz Roh Werkstoff, vol. 67, n? 4, 2009.

Z.  OSMAN, PIZZI, A., et ALAMIN, I. H., « Comparative properties of agrofiber based particle boards using newly developed bonding materials », J. Biobased Materials & Bioenergy, vol. 3, 2009.

A.  MOUBARIK, PIZZI, A., ALLAL, A., CHARRIER, F., et CHARRIER, B., « Cornstarch and tannin in phenol-formaldehyde resins for plywood production », Ind. Crops & Prod., vol. 30, n? 2, 2009.

A.  MOUBARIK, CHARRIER, F., CHARRIER, B., PIZZI, A., et ALLAL, A., « Evaluation of decay resistance of composites made from borax-impregnated wood and bonded with a formaldehyde-free cornstarch and tannin adhesive », Annals of Forest Science, vol. 66, n? 1-6, 2009.

A.  AHAJI, DIOUF, P. N., ALOUI, F., ELBAKALI, I., PERRIN, D., MERLIN, A., et GEORGE, B., « Influence of heat treatment on antioxidant properties and colour stability of beech and spruce wood and their extractives », Wood science and technology, vol. 43, n? 1-3, 2009.

R.  ANANIAS, MOUGEL, E., et ZOULALIAN, A., « Introducing an overall mass-transfer coefficient for prediction of drying curves at low-temperature drying rates. », Wood Science and Technology, vol. 43, n? 1-2, 2009.

M. A.  ABBASSI, GRIOUI, N., HALOUANI, K., ZOULALIAN, A., et ZEGHMATI, B., «  A practical approach for medelling and control of biomass pyrolysis pilot plant with heat recovery from combustion of pyrolysis products », Fuel Processing Technology, vol. 90, n? 10, 2009.

F.  BEZZAOUCHA, LOCHON, P., JONCQUIERE, A., AINAD-TABET, D., BREMBILLA, A., et FISCHER, A., « Properties of new cationic amphiphilic polymers in hydro-alcoholic media », Polymer International, vol. 58, n? 12, 2009.

G. A.  AMARAL-LABAT, PIZZI, A., GONCALVES, A. R., CELZARD, A., et RIGOLET, S., « Environment-friendly soy flour-based resins without formaldehyde », J. Appl. Polymer Sci., vol. 108, 2008.

G.  TONDI, ANDREWS, S., PIZZI, A., et LEBAN, J. M., « Comparative potential of alternative wood welding systems ? Ultrasonics and micro friction stir welding », J. Adhesion Sci. Technol., vol. 21, n? 16, 2007.

A.  AGUILERA, VEGA, M., et MEAUSOONE, P. J., « Effect of grain angle of the amplitudes of acoustic emission and surface roughness in wood machining », Wood Science and Technology, vol. 41, n? 4, 2007.

L.  CHEBIL, ANTHONI, J., HUMEAU, C., GERARDIN, C., ENGASSER, J. M., et GHOUL, M., « Enzymatic acylation of flavonoids: Effect of the nature of the substrate, origin of lipase, and operating conditions on conversion yield and regioselectivity », J. Agric. Food Chem., vol. 55, n? 23, 2007.

M.  VEGA, AGUILERA, A., et MEAUSOONE, P. - J., « Esfuerzos de corte y rugosidad surperficial en el fresado de pino radiate y su relacion con emision acustica », Maderas, Ciencias y tecnologia, vol. 9, n? 2, 2007.

J.  BOUCHER, MEAUSOONE, P. - J., MARTIN, P., AUCHET, S., et PERRIN, L., « Influence of helix angle and density variation on the cutting force in wood-based products machining », Journal of Materials Processing Technology, vol. 189, n? 1, 2007.

F.  ALOUI, AHAJJI, A., IRMOULI, Y., GEORGE, B., CHARRIER, B., et MERLIN, A., « Inorganic UV absorbers for the photostabilization of wood-clearcoating systems: comparison with organic UV absorbers », Applied surface science, vol. 253, n? 8, 2007.

M.  HAZWAN-HUSSIN, ABDUL-RAHIM, A., MOHAMAD-NASIR, M. - I., YEMLOUL, M., PERRIN, D., et BROSSE, N., « Investigation on the structure and antioxidant properties of modified lignin obtained by different combinative processes of oil palm fronds (OPF) biomass », 2014, vol. 52.